Các Sản Phẩm

• Lava™ Plus
• Lava Esthetic

• Shock absorbency cushions against chewing forces for successful implants
• Easy to adjust and re-polish, right in your operatory, so you can achieve the ideal occlusion
• Excellent wear resistance
• Brilliant and long-lasting polish
• Excellent stain resistance for color stability
• Limited 10 years warranty*

• Implant-supported crowns
• Crowns
• Onlays
• Inlays
• Veneers

The science behind nanotechnology delivers:

• Exceptional durability
• Excellent polish retention
• Less wear to opposing enamel than glass ceramics

Delivers the edge you need.

The less brittle nature of Lava™ Ultimate Restorative allows for easy milling and better edge quality.

(l.to r.) Lava™ Ultimate Restorative, feldspathic glass ceramic, lithium disilicate

SEM images MOD Tooth #3 inlays milled on a CAD/CAM system. Lava™ Ultimate Restorative exhibits less chipping at restoration margins than glass ceramics including lithium disilicate.
Source: 3M™ ESPE™ internal data

Shock absorbency cushions against chewing forces

A resin nano ceramic has an elastic modulus that's comparable to dentin - which is much lower than what brittle glass ceramic materials or PFM veneering porcelains provide. This emables Lava™ Ultimate Restorative to better absorb chewing forces and reduce stress to the restoration - which is especially advantageous for crowns over implants.

Lava™ Ultimate Restorative Shock absorbency The periodontal ligament is removed by the implant procedure, which removes shock absorbance or sensory function - so the crown may fracture or chip.

It's an easy choice

You can benefit immediately by the unique handling and functional advantages

Whether you have a chairside system or not, there are many reasons to prefer Lava™ Ultimate Restorative. It's tough, yet gentle. Resilient, yet easy to adjust. It truly is the ultimate CAD/CAM Restorative material.

• Less wear to opposing enamel than glass ceramics
• Easy to adjust and re-polish, right in your operatory, so you can achieve the ideal occlusion
• It allows access to the abutment and implant at any time. Just cut a hole, reseal it with a composite and re-polish

Less wear to opposing dentition Enamel Volume Loss (mm2) measured in two-body wear
Source: University of Minnesota

Brilliant esthetics with a long-lasting polish.

The chairside block that was born beautiful.

Nanotechnology on the inside means a beautiful, long-lasting polish on the outside. In fact, it takes only minutes to give your milled Lava™ Ultimate restorations an amazing, enamel-like luster. Tests prove the brilliant polish will last - and no firing is required.

Easy to mill … and easy to work with, too!

Lava™ Ultimate Restorative brings new meaning to the word "productivity."

Your milled Lava™ Ultimate restoration can be finished in a few easy steps.

Check out these other benefits to see how Lava™ Ultimate CAD/CAM material continues to perform:

Tooth-brushing abrasion

Lava™ Ultimate Restorative - Designed for Lasting Beauty

Lava™ Ultimate Restorative wears far less on opposing dentition compared to glass ceramic materials

Fatigue Strength

This study shows Lava™ Ultimate Restorative is the only material that maintains its initial strength when changing from a dry to a wet environment. However, all materials show a decrease in strength upon cycle fatigue in water. 3M™ ESPE™ internal data.

Tooth-like Fluorescence

(l to r) Lava™ Ultimate A2 , Lava™ Ultimate A2 Photo courtesy of Paulo Monteiro DMD, MSC, Assistent Professor

Resilient

Lava™ Ultimate Exhibits Excellent Plaque Resistance
3M™ ESPE™ internal data

Stain Resistance

ΔE color change after 7 days storage in red wine at 37°C

Lava™ Ultimate Exhibits Excellent Stain Resistance Like Glass Ceramics
3M™ ESPE™ internal data

Plaque Resistance

Dried biomass in mg/cm²(grown in human saliva for 26 hours)

Lava™ Ultimate Exhibits Excellent Plaque Resistance
3M™ ESPE™ internal data

Less Wear to Opposing Dentition

2-Body Wear Enamel Cusp Volume Loss vs. Material Disk (mm3) Lava™ Ultimate Restorative is far less wearing on opposing enamel compared to glass ceramic materials.

Source: University of Minnesota.

High Compressive Strength

(MPa)

Lava™ Ultimate Restorative has similar or higher compressive strength than leading chairside materials.
Source: 3M™ ESPE™ internal data.

High Flexural Strength

(MPa)

Flexural Strength is measured using dry bars of the materials. Initial strength of Lava™ Ultimate Restorative is superior to the majority of chairside materials, except IPS e.max CAD blocks.
Source: 3M™ ESPE™ internal data.

Natural-looking and tough.

Real performance that outdistances glass ceramics.

A fractured partial crown made with glass ceramic material was replaced with a crown milled from Lava™ Ultimate Restorative.

Lava™ Ultimate Restorative Replacement of Ceramic Crown

(l to r) Old Glass Ceramic Restoration, New Lava™ Ultimate Restored Tooth

Clinical case and pictures by Dr. Zafiriadis

Lava™ Ultimate Restorative Specially Suited for Implant Crowns